Other Products

BM Enterprises provides a wide variety of high-performance refractory products that serve to address the aggressive demands of diverse industrial uses. Its product line consists of:

Low Cement Castables Dealer and Supplier in India

BM Enterprises is one of the leading manufacturers and authorized distributors dealing in Mahakoshal Refractories for high-performance low cement castables (LCC). These value-added monolithic refractories are designed with much lower lime (CaO) content-usually less than 2.5% compared to conventional castables.
Low cement castables have better abrasion resistance, lower porosity, increased strength, and enhanced thermal stability due to their optimised particle size distribution and lower cement content. Additionally, they offer superior resistance to thermal shock and chemical attack, which makes them appropriate for harsh service conditions in the petrochemical, steel, cement, and power industries.
To put it simply, low-cement castables maintain good workability and installation qualities while providing better performance and a longer service life than traditional refractory castables.

Key Features

Superior Thermal Stability: Capable of withstanding temperatures of up to 1800°C, depending on the grade, such as Accmon 90.

High Abrasion & Chemical Resistance: The dense structure provides a formidable barrier against mechanical wear and slag attack.

Low Porosity: Reduced water demands in mixing provide for a greatly compacted lining, which minimizes heat loss and chemical penetration.

Exceptional Mechanical Strength: Higher cold crushing strength (CCS) and hot modulus of rupture (HMOR) compared to standard castables.

Improved bonding: Utilizes hydraulic bonding that maintains structural integrity even during rapid temperature fluctuations (thermal shock).

Technical Specifications (Accmon Series)

BM Enterprises supplies a wide range of grades tailored to specific alumina requirements:

Grade	Alumina (Al2​O3​) %	Max Service Temp	Primary Application
Accmon 45	≥ 45%	1500°C	General furnace linings, boilers
Accmon 60	≥ 60%	1600°C	Reheating furnaces, kiln hoods
Accmon 70	≥ 70%	1650°C	Steel ladles, burner blocks
Accmon 80	≥ 80%	1700°C	High-wear zones in steel/cement kilns
Accmon 90	≥ 90%	1800°C	Extreme heat zones, chemical reactors

Common Applications

Steel & Metallurgy: Ladle linings, tundishes, runners for blast furnaces.

Cement Production: Pre-heater cyclones, kiln hoods, and cooler zones.

Petrochemicals: Reformer lining, Incinerators for hazardous wastes.

Power Plants: High-temperature boiler areas and cyclone separators.

Insulating Castables
BM Enterprises offers premium-quality Insulating Castables designed for excellent thermal insulation, low heat conductivity, and high energy efficiency. Lightweight yet durable, these castables reduce heat loss while maintaining good mechanical strength at high temperatures. Easy to install and repair, they are ideal for furnace linings, boilers, kilns, incinerators, and other heat-processing equipment. As a leading manufacturer and supplier across Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NCR and all over India, BM Enterprises delivers reliable insulating solutions for a wide range of industries. Lightweight, energy-saving, and best for minimizing heat loss in furnaces and kilns.

High Alumina Cement
High Alumina Cement is a special type of cement made mainly from bauxite (aluminium ore) and lime, containing a high percentage of alumina (usually 40%–80%). Unlike ordinary Portland cement, HAC has very high early strength, rapid setting, and excellent resistance to high temperatures and chemical attack. BM Enterprises supplies premium High Alumina Cement designed for fast setting, high early strength, and excellent resistance to chemical attack and high temperatures. Ideal for use in refractory castables, mortars, and concretes, it provides durable performance in furnaces, kilns, boilers, and other high-heat industrial applications. Trusted for quality and consistency, BM Enterprises is a reliable manufacturer and supplier of High Alumina Cement across India. Famous for its high bonding strength and resistance to high temperature, with lasting durability under tough conditions.

Plastic Masses (Single & Double Component)
BM Enterprises provides premium Plastic Masses (Single & Double Component) designed to install easily, bond strongly, and exhibit superior thermal resistance. These pre-mixed refractory masses are perfect for furnace repair, patching, and lining, kilns, boilers, and steel plants. They have excellent thermal shock resistance, high strength, and extended service life, so they are a best bet for tough industrial processes. Flexible, self-install refractory masses with superior thermal shock resistance and conformability for repair work.

Grouting Material
Grouting material is a specifically designed mixture (cement-based, epoxy, or polymer-based) applied to fill gaps, seal joints, anchor equipment, and tighten structures. BM Enterprises provides high-quality grouting material meant for high strength, good flow, and durable performance. Designed for industrial and construction applications, it ensures good bonding, non-shrink characteristics, and long-lasting durability. Perfect for gap filling, anchoring heavy equipment, foundation repair, and base plate securing, our grouting compound provides consistent performance under extreme conditions. BM Enterprises is a reputable manufacturer and supplier of grouting chemicals in India, providing consistent quality to address a wide range of project requirements.

Calcem 50 Refractory Cement Binder
Calcem 50 is a high performance calcium aluminate cement specially formulated for refractory applications where excellent strength, thermal stability and durability are required. It contains about 50% alumina and has superior resistance to high temperatures, thermal shock and chemical attack. Calcem 50 (refractory binder cement) is widely used in the manufacturing and installation of refractory products for high-temperature industries. It serves as a hydraulic binder in low-cement castables, conventional castables, refractory mortars, and gunning mixes. Calcem 50 offers fast strength development, dependable bonding properties and consistent performance in harsh industrial environments such as steel plants, cement industries, power plants, foundries and petrochemical units. Controlled composition provides enhanced refractory life and improved operational efficiency in high temperature applications.
Specifications:

Alumina Content: Approximately 50% Al₂O₃

Maximum Service Temperature: 1600°C

Bulk Density: Typically 2.8–3.0 g/cm³

Setting Time: Controlled / Rapid Hardening

Form: Fine Powder

Packaging: Moisture-resistant 25kg to 50kg Bags

Brand: Mahakoshal

Applications: Ideal for low-cement castables, refractory mortars, steel ladles & tundishes, incinerator linings, furnace linings, boilers, and kilns.

Maxphos Series (90XR & 80) – High-end phosphate-bonded castables with superior abrasion stability and resistance for high-temperature use. The Maxphos Series (80 & 90XR) and Maxmon 80 are premium, high-performance refractory castables with excellent strength, thermal shock resistance, and abrasion resistance at high temperatures. Formulated for high-duty industrial applications, they offer longer service life and consistent performance in furnaces, kilns, boilers, steel plants, and foundries. BM Enterprises is a reliable manufacturer and supplier of the Phoscast 90 XR (Refractory Castable) Series and Maxmon 80 throughout India.

Maxmon Gunning Castable & Maxmon ABR Gun 70 – Designed for rapid repair with good adhesion, excellent erosion resistance, and simple gunning application.

Refractory Mortar ACCOSET 50 FINE and ACCOSET 50 NORMAL

In high-temperature industries, the quality of refractory joints is just as important as the refractory bricks themselves. Refractory accoset mortar is specially developed to create strong, heat-resistant bonds between firebricks and refractory shapes, helping furnaces, kilns, boilers, and other thermal equipment operate efficiently for extended periods. It is widely used in steel plants, cement factories, glass manufacturing units, foundries, ceramic industries, and power generation facilities where reliable performance under extreme temperatures is essential.
Accoset 50 Fine and Accoset 50 Normal also known as AQUASET are premium air-setting refractory mortars manufactured by Calderys India and supplied by BM Enterprises. These products are designed to provide excellent bonding strength, good workability, and dependable resistance to thermal stress, slag attack, and chemical exposure. Their carefully engineered composition helps create durable refractory linings that maintain stability even in demanding operating conditions.
Accoset 50 Fine is preferred for applications requiring thin and precise joints due to its finer particle size and smooth consistency. Accoset 50 Normal is suitable for routine refractory bricklaying and maintenance work, offering dependable adhesion and long-lasting service life across a wide range of industrial applications.
BM Enterprises is a trusted supplier of Calderys refractory materials, providing Accoset Fine and Accoset Normal to customers across Faridabad, Gurugram, Noida, Ghaziabad, Delhi NCR, Karnal, Panipat, Ambala, Bhiwadi, Jaipur, Bawal, Neemrana, Mandi Gobindgarh, Jalandhar, Ludhiana, and other industrial regions throughout India. Whether for new refractory installations or repair projects, these high-quality mortars deliver the strength, durability, and thermal reliability required for efficient industrial operations.
Product Specifications

Alumina Content: Approx. 45.0% - 50.0% Al₂O₃

Service Temperature: Up to 1500°C

Grain Size: Accoset 50 Fine has a finer grain for thin joints, while Accoset 50 Normal has a coarser mix for general installations.

Setting Type: Air-setting refractory mortar that hardens at room temperature and strengthens with heat.

State: Ready-to-use air-setting mortar

Color: Grey to off-white

Packaging: Available in 25 kg bags and industrial packing options

Shelf Life: Up to 12 months in dry storage conditions

Bulk Density: Approx. 1.5 to 2.0 g/cm³

Product Features

Strong Bonding Strength – Provides durable joints between refractory bricks & shapes.

Thermal Shock Resistance – Withstands frequent heating and cooling cycles without cracking.

Chemical Resistance – Protects against slag, alkalis, and corrosive gases in furnaces and kilns.

Versatile Application – Suitable for steel, cement, glass, and petrochemical industries.

Easy Workability – Smooth consistency allows quick mixing, laying, and installation.

At BM Enterprises, we are the premier supplier, exporter, and reliable distributor of Mahakoshal Refractories in Faridabad, Gurugram, and Delhi NCR. With decades of experience, we provide high-grade materials, punctual delivery, and technical guidance to satisfy the requirements of steel plants, foundries, cement plants, and other heavy-duty processes.

Reinforce your industrial lining systems with our long-lasting, energy-efficient, and cost-effective refractory products – because performance begins with the right basis.